The Novo 2 is a table-style electronic cigarette that uses pre-filled pods to deliver the vapor. It’s sleek, simple and very easy to use. But just like any other e cig, it can have its quirks. One of the most common problems with the Novo 2 is not hitting. While it can be frustrating and seem like an impossible fix, there are actually some easy solutions to this problem.
If you experience not hitting while using your Novo 2, you’re not alone! This happens from time to time with almost every brand of e cig on the market today. Luckily, there are quite a few ways you can troubleshoot and get your device back up and running in no time at all. Keep reading to find out how you can hit consistently with your new e cig!
Check Your Coil
Before you do anything else, you should check your coil. There are a few reasons your coil may be defective. Sometimes, a coil can get burnt out because it is being used past its lifespan. Other times, the coil is just a poor quality product that is defective from the get-go. Whatever the cause, you want to make sure your coil is not the culprit for not hitting.
If your coil is burnt out or defective, you won’t be able to get much, if any, vapor out of your device. The easiest way to check your coil is to swap it out with a new one. Luckily, the Novo 2 uses the same type of coil that most other e cig brands use, so you can easily swap it out with a new one. You can usually find replacement coils online or at your local vape shop.
Make Sure Your Battery is Charged
If you have checked your coil and it is not the problem, you should make sure your battery is charged. The Novo 2 has a built-in battery, and it is a common cause for not hitting. If you notice that your device is not producing any vapor, you should first make sure the battery is charged.
The first thing you want to do when you notice your device is not producing any vapor is check to make sure your battery is charged. You can do this by pressing the button 5 times in quick succession to illuminate the battery indicator light. You want the light to be red or illuminated so you know your battery is low.
If the light is orange or amber, your battery is at a medium charge level. And if the light is green, your battery is fully charged. If the light is red, make sure you plug your device into the charger. If the light is orange or amber, try charging it for at least 30 minutes. And if the light is green, try charging it for at least an hour to make sure it gets a full charge.
Check Your Mouthpiece
After you have checked your coil and battery to make sure they are not the problem, you should check your mouthpiece. The mouthpiece is the small rubber piece that goes between your mouth and the device. Sometimes, the mouthpiece can be knocked out of place or come loose.
If this happens, you will notice that you are not getting any vapor from your device. Luckily, it is very easy to fix the mouthpiece.
- First, you want to take off the device by unscrewing the two screws on the bottom of the device.
- Next, you want to remove the mouthpiece. If the mouthpiece has come loose, simply put it back in place and screw the device back together. If the mouthpiece has come out of place, simply put it back in place and screw the device back together.
How to Fix Novo 2 Not Hitting
Solution 1: Dry Burn
If your device has low charge, a burnt out coil, or a loose mouthpiece and none of the above solutions worked, you can try a dry burn. A dry burn is a very simple troubleshooting trick that you can use to clean your device. It does not actually fix any problems with the device, but it does reset the device so it can start producing vapor again.
- First, you want to take off the device by unscrewing the two screws on the bottom of the device.
- Next, you want to remove the mouthpiece.
- Next, you want to press the button on the device 5 times in quick succession to turn off the device.
- Once the device is off, you want to hold down the button while you take out the battery.
- Next, you want to press the button while the battery is out.
- Once you have pressed the button for 15-20 seconds, you want to let go of the button and put the battery back into the device.
- Next, you want to put the mouthpiece back in place and screw the device back together.
Solution 2: Change your Pod
If none of the above solutions worked, you can try changing out your pod. The pods that come with the Novo 2 are refillable, so you can use any e liquid of your choice in them. They are also replaceable, and you can replace the pod with a new one once it stops producing vapor.
You can find replacement pods for the Novo 2 online or at your local vape shop. Before you think about getting a new device, you should try these easy troubleshooting fixes to see if they will help fix your device. If all of this doesn’t work, then you may want to consider purchasing a new device altogether. But before you go and spend money on a new device, try these fixes first to see if they can help you get your device up and running again!