Smok is a brand that has really taken off in the last few years, and with good reason. They produce affordable, quality devices and offer excellent service to their customers. The Smok Novo vape is one of their more straightforward devices, but it’s also one of their most popular. If you’ve recently purchased this device and are now looking to change the coil on your new Smok vape, we have all the information you need right here!
Changing the coil on your Smok Novo vape isn’t difficult, but if you’re not used to working with devices like this it might seem pretty weird at first. However, once you get the hang of it, changing coils on your Smok vape becomes second nature.
Why is Changing Coils Important?
Changing your coils as soon as they begin to taste burnt or smell bad is essential to keeping your vape experience good. The coils are the part of your vape that actually touch your e-liquid, and they can burn out if they are used too long. This is why it’s so important to replace them regularly.
There are two main reasons you should replace your coils whenever they start to taste burnt.
The first is that burnt flavor won’t taste good and might make you not want to vape because it’s not pleasant.
The second reason is that burnt coils can actually be pretty dangerous to use because they can start to give off toxic fumes. These fumes can be harmful to you and those around you.
How to Change the Coil on Your Smok Novo Vape
What You’ll Need
If your vape uses pre-made coils, you’ll only have to change the coil. If your vape is a rebuildable, you’ll have to change both the coil and the wick. Make sure you have the following items before you begin:
- New Coil
- New tank
Step 1: Turn It Off
Make sure your vape is turned off before you start changing the coil. This will prevent you accidentally activating the device while you’re working on it and possibly burning yourself.
Step 2: Set Up New Coil
Put the new coil into the device and make sure it’s facing the right way. The wide part of the coil should face the top of the device and the pointy part should face the bottom. It’s important that you set up the coil correctly or it won’t work properly and could even cause damage to your device.
When you’re setting up the new coil, you may notice some e-liquid dripping from it. Don’t worry about this! Just let it drip down into the tank and then pour the rest out of the tank using a paper towel or your finger.
Step 3: Shake Device to Dispose of e-liquid
Hold the device over the sink and shake it a couple of times to get rid of e-liquid that may have dripped into the tank.
Step Four: Remove Tank and Coils
Now, unscrew the tank from the device. You may need to use a screwdriver to unscrew the tank if it’s been screwed on too tightly. Next, remove the old coil from the tank. You can do this by pulling it out or carefully cutting it off using a pair of scissors or a knife.
Step Five: Install New Coil
Take the new coil and wrap the wick around it. The wick should run across the bottom of the coil and go up one side, over the top, and down the other side. Make sure the wick is secure and not falling over the side. When you’ve finished, put the new coil back into the tank.
Changing your coil can seem a little overwhelming at first, but once you get the hang of it, it’s pretty easy. Just make sure to keep your coil clean and replace it as soon as you notice it start to taste burnt. This will help keep your vape tasting great and make sure it lasts a long time.